Studer 800 Mk3 with Remote, Stand and AutoLocator.
Heads Have 50% Head Life --They are the 327 Heads.
(Note: One Head has a scratch on it--which can be polished out)
Machine is Aligned for 456 tape as is and shows no problems on Record,Playback,Or Erase +6db
The Machine has 12006.5 hrs on the Machine Meter-which no longer seams to work.Machine has been completly recapped with NICHIICON CAPS in APRIL 05 Including all of the Power Supplies as well. Futher all of the Power Supplies have New 400V Regulators installed and the Internal Factory Wiring was Replaced with heavier guage wire in all the suppies.The 24 Pre-Amps have also been recapped.The 24 channels on the meter bridge have also been recapped. Machine is very clean.
Things left to do:( In short 4 LEDS NEED TO BE CHANGED AS LISTED BELOW)
Channel 8 Sync on 24 trk meter bridge the yellow LED needs to be replaced.
Channel 20 the green on 24 trk meter bridge LED needs to be replaced.
On "Operating Mode" above the Meter Bridge the yellow Mute LED needs to be
replaced and the "rehearse" yellow LED needs to be replaced.
$12,999.99
gearorphanage.com
No comments:
Post a Comment